PC PUMP
PC pump system consists of Surface Drive Device, Downhole progressive cavity pump, Electrical Control Panel and Matching Tools.
PC pump has been widely used in oil fields at home and abroad and plays an important role in oil production. There is a trend to replace the large heavy pumping units in shallow well and middle-deep well.
According to the new market research report “Progressing Cavity Pump Market by Pumping Capacity (Up to 500 GPM, 501–1,000 GPM, and more), Power Rating (Up to 50 HP, 51–150 HP, and more), End User (Oil & Gas, Food & Beverages, and more), and Region – Global Forecasts to 2026” The global progressing cavity pump market size is projected to reach USD 5.9 billion by 2026, at a CAGR of 6.0%, from an estimated USD 4.4 billion in 2021. The key drivers for the progressing cavity pump market include use of PCPs in enhanced oil recovery and upstream processes and Intensifying need for water & wastewater management in developed nations.
Application:
The screw pump can be used for low viscosity crude oil, also for heavy oil, high freezing point oil, high wax oil, high sand oil and high gas oil. It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance.
Advantages:
For the use of PC pump, we have four driving head device for option, Belt Gear Reduction Transmission (horizontal), Gearless Transmission (vertical), Direct Drive Motor Gearing and Eccentric Test Gearing. According to the promotion recent years, it is a trend that the PC pump will replace the large heavy beam-pumping unit in shallow well and middle-deep well. It has advantage of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance. Along with the improvement of application technology and oil production equipment, PC Pump will be widely used in future.
Specifications:
Model | Length mm | Maxi. Dia. mm | Rotor screw in | Stator upper screw in | Stator lower screw in | Rod rate rpm | Theoretical dairy flow m3/d | Applicable tubing in | Head m |
GLB\10/35 | 2940 | 90 | 15/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 1-4 | ≥73 | 1000-1400 |
GLB\28/40 | 3650 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 3-6 | ≥73 | 1200-1600 |
GLB\40/12 | 1550 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 600-800 |
GLB\40/14 | 2200 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 400-600 |
GLB\40/21 | 2330 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 700-1000 |
GLB\40/42 | 4670 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 1200-1800 |
GLB\50/21 | 2380 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 5-10 | ≥73 | 700-1000 |
GLB\75/14 | 2140 | 90 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 400-600 |
GLB\75/21 | 2200 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 700-1000 |
GLB\75/40 | 4410 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 1200-1600 |
GLB\120/18 | 3000 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 500-800 |
GLB\120/21 | 2932 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 700-1000 |
GLB\120/27 | 4428 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 800-1000 |
GLB\120/36 | 5865 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1100-1400 |
GLB\120/40 | 5900 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1200-1600 |
GLB\165/35 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 14-36 | ≥73 | 900-1300 |
GLB\190/33 | 5650 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 15-40 | ≥73 | 900-1300 |
GLB\200/27 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 17-42 | ≥73 | 800-1000 |
GLB\300/21 | 4850 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥73 | 700-1000 |
GLB\300/26 | 6000 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 700-1000 |
GLB\300/33 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 800-1200 |
GLB\420/20 | 4820 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 35-70 | ≥88.9 | 700-1000 |
GLB\500/14 | 3380 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 600-800 |
GLB\500/21 | 5060 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 700-1000 |
GLB\600/18 | 7122 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 85-130 | ≥88.9 | 500-900 |
GLB\230/2-30 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 20-50 | ≥88.9 | 900-1200 |